Table 6-6 Error Code F4-16 (cont'd.)
Step
Actions and Questions
5
The following Finisher components and areas are
associated with this specific problem. One or more of
these components or areas may have failed partially or
completely. If you cannot isolate this problem using the
steps in this Repair Analysis Procedure, replace each
component or troubleshoot each area listed below, one at
a time, until you isolate and solve the problem.
Horizontal Transport Input Sensor (RRP 6-11)
Finisher Main Board (RRP 6-84)
Print Engine Controller Board (RRP 1-72)
Wiring and connectors linking the components.
6-660
DocuPrint N4525 Network Laser Printer - Service Guide
Yes
No