Xerox DOCUPRINT N4525 Service Quick Reference Manual page 463

Removal
1.
Remove the Jogging Cover (RRP 6-14).
2. Remove the Front and Rear Top Cover (RRP 6-16).
3.
Remove the Rear Cover (RRP 6-21).
4.
Remove the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
In the following steps, the procedure on the front side is the same
Note
as on the rear side, and therefore the procedure on the front side
only is described. Apply the same procedure to the rear side, too.
5.
Remove two screws that secure the lower Holder (PL 20.14.5) to the Bracket
Front (PL 20.14.3).
6. Disengage the Spring (PL 20.14.6) from the upper and lower Holder and
remove the Spring.
7.
Remove two screws that secure the upper Holder to the Bracket.
8.
Disengage the screw hole in the upper Holder from the hole in the Bracket
Front, and push the upper Holder inside to remove it.
9.
Disengage the screw hole in the lower Holder from the hole in the Bracket
Front, and push the lower Holder inside to remove it.
10.
Release the Belt (PL 20.14.4) from the upper and lower Pulley (PL 20.14.12),
and remove it.
Replacement
In the following steps, the procedure on the front side is the same
Note
as on the rear side, and therefore the procedure on the front side
only is described. Apply the same procedure to the rear side, too.
1.
Engage the Belt (PL 20.14.4) with the upper and lower Pulley (PL 20.14.12).
2.
Engage the Belt with the lower Holder (PL 20.14.5), and align the lower Holder,
together with the Belt, with the mounting position.
3.
Engage the Belt with the upper Holder so as not to slacken the Pulley, and align
the upper Holder, together with the Belt, with the mounting position.
4.
Secure the upper Holder to the Bracket Front (PL 20.14.3) with two screws.
5.
Engage the Spring (PL 20.14.6) with the upper and lower Holder.
6.
Secure the lower Holder to the Bracket Front with two screws.
7.
Mount the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
8. Mount the Rear Cover (RRP 6-21).
9.
Mount the Front and Rear Top Cover (RRP 6-16).
10.
Mount the Jogging Cover (RRP 6-14).
Volume 6 / Finisher - RRPs 6-795