RRP 6-8 Cover Top, Horizontal Transport Assembly
(PL 20.3)
Fig 6-7 Cover Top, Horizontal Transport Assembly
Removal
1.
Insert a flat-tip screwdriver between the cover on the rear side of the Horizontal
Transport and the Cover Assembly Open (PL 20.3.2), and deflect the cover on
the rear side of the Horizontal Transport to release the pin on the rear side of
the Cover Assembly Open from the pivot hole on the rear side of the Horizontal
Transport.
2.
Remove the Cover Top Horizontal Transport Assembly (PL 20.3.1) in the front
diagonal upward direction.
When lifting the cover away from the Horizontal Transport, be
Caution
aware the cover is still attached by the strap. Be careful that it
does not jerk out of your hands and cause damage.
Replacement
1.
Insert the cover onto the pin on the front of the Horizontal Transport.
2.
Deflect the cover on the rear side (near the pivot pin) and and insert the pin into
the hole on the rear side of the Horizontal Transport.
S4525-428
Volume 6 / Finisher - RRPs
6-721