Replacement
1.
Align the Right Cover with the mounting position on the Finisher.
2.
Secure the Right Cover to the No Paper Sensor with a screw.
3.
Secure the Right Cover to the Stack Arm Assembly with four screws.
4.
Secure the Right Cover to the Finisher with two screws.
5.
Secure the Right Cover to the Finisher with seven screws.
6.
Align the Bracket Tray Lower, with the mounting position, and secure it with four
screws.
7.
Mount the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
8.
Mount the Rear Cover (RRP 6-21).
9.
Mount the Front and Rear Top Cover (RRP 6-16).
10.
Mount the Stacker Bin.
11.
Mount the Jogging Cover (RRP 6-14).
Volume 6 / Finisher - RRPs
6-803