Plug/Jack Connectors; Table 3-17 Plug / Jack Locations - Xerox DOCUPRINT N4525 Service Quick Reference Manual

Plug/Jack Connectors

Use the table and map in this section to locate specific Plug/Jack connectors within the
Duplex Unit.
To find the location of a Plug/Jack within the Duplex Unit;
1.
Locate the Plug/Jack connector number in the first column of the Plug/Jack
Location table.
2. Locate the corresponding map and location number, such as M1-5, in the
second column.
3.
With this information, go to the appropriate map (in this case map M1) and
locate the item number (in this case 5).

Table 3-17 Plug / Jack Locations

Plug/ Map &
Jack Number
123 M1-10
124 M1-2
125 M1-1
222 M1-3
223 M1-5
224 M1-9
473 M1-6
474 M1-4
475 M1-8
611 M1-7
Connected to...
Wait Sensor
Exit Sensor
Duplex Interlock Switch
Duplex Board
Duplex Board
Duplex Board
Duplex Board
Duplex Board
Duplex Board
Duplex Interface Cable
Volume 3 / Duplex Unit - P/J Connectors
Other end connected to...
P475 Duplex Board
P474 Duplex Board
P474 Duplex Board
Exit Sensor
Duplex Motor
Wait Clutch
P611 Duplex Interface Cable then to
P463 Input/Output Board
J125 Duplex Interlock Switch and
J124 Exit Sensor
J123 Wait Sensor
P473 Duplex Board
3-553