Fig 6-3 Sync-Belt; Rrp 6-3 Horizontal Transport Sync-Belt (Pl 20.2) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 6-3 Horizontal Transport Sync-Belt (PL 20.2)

Fig 6-3 Sync-Belt

Removal
1.
Remove the Horizontal Transport
2. Unplug the connector (P/J260) of the Horizontal Transport Harness Assembly
(PL 20.2.24) from the Sensor (PL 20.2.17).
3.
Remove the
Pulley 2, Tension Spring, Sensor and Ground Wire
4.
Remove the In-Gate Solenoid Assembly (RRP 6-7).
5.
Remove the Transport Gear Kit (RRP 6-6).
6.
Remove the Bracket Assembly (RRP 6-4).
Before removing the Sync-Belt, refer to the routing in Figure 6-4
Note
in RRP 6-4.
7.
Remove the Sync-Belt from the Horizontal Transport.
Replacement
1.
Mount the Sync-Belt while taking care of the routing to the gear and pulley on
the Horizontal Transport.
2.
Mount the Bracket Assembly (RRP 6-4).
3. Mount the Transport Gear Kit (RRP 6-6).
4. Mount the In-Gate Solenoid Assembly (RRP 6-7).
5.
Mount the
Pulley 2, Tension Spring, Sensor and Ground Wire
6.
Plug the connector (P/J260) of the Horizontal Transport Harness Assembly (PL
20.2.24) to the Sensor (PL 20.2.17).
7.
Install the Horizontal Transport
6-716 DocuPrint N4525 Network Laser Printer - Service Guide
.
Rear Cover
Rear Cover .
S4525-423
(RRP 6-2).
(RRP 6-2).