Staple Section; Fig 2-9 Staple Section - Xerox DOCUPRINT N4525 Service Quick Reference Manual

Staple Section

The Stapler staples a bundle of paper in the Compiler Tray. When performing the stapling,
the Stapler Unit starts moving along rails to the paper staple position. The Stapler Unit
moves to the front side when the right side of paper is stapled, or to the rear side when the
left side of paper is stapled. When the Stapler Unit moves, the Stapler Traverse Home
Position Sensor detects the absolute position of the Stapler Unit from the presence of a
notch on the guide. After the Stapler Unit moves to the paper staple position, the bundle of
paper is stapled immediately in the Dual Stapling mode, but in the Corner Stapling mode
the Stapler Unit swings 45
angle in the Corner Stapling mode, the Stapler swings +45
to the front side, but -45
bundle of paper, the Exit Roller rotates together with the Main Paddle to deliver the
bundle of paper to the Stacker Bin via the Exit section.
The staple positions below are specified for Letter and A4 paper
Note
size.

Fig 2-9 Staple Section

Staple Components
1.
Staple Unit
The Staple Unit staples a bundle of paper.
2.
Stapler Traverse Home Position Sensor
The Stapler Traverse Home Position Sensor detects the absolute position of the
Stapler Unit from the presence of a notch on the guide rail.
2-636 DocuPrint N4525 Network Laser Printer - Service Guide
o
before the bundle of paper is stapled. As for the Stapler tilt
o
when it moved to the rear side. After the Stapler staples the
o
when the Stapler Unit moved