Xerox DOCUPRINT N4525 Service Quick Reference Manual page 447

Removal
1.
Remove the Jogging Cover (RRP 6-14).
2. Remove the Top Cover, Front (RRP 6-16).
3.
Unplug the connector (CN 4) of the Harness Motor (PL 20.16.13) from the
Clamp Motor - MP4.
4.
Remove five screws that secure the Motor Assembly-MP4 to the Finisher, and
remove the Motor Assembly-MP4 with the Sensor : Exit Roller Open/Close
Home Position (PL 20.11.7).
5.
Unhook the Sensor : Exit Roller Open/Close Home Position at three places,
and remove the Sensor : Exit Roller Open/Close Home Position from the Motor
Assembly-MP4.
Replacement
1.
Align the Sensor : Exit Roller Open/Close Home Position (PL 20.11.7) with the
mounting positions in the Motor Assembly-MP4, and secure it .
2.
Align the Clamp Motor - MP4 with the mounting position in the Finisher, and
secure it with five screws.
3. Plug the connector (CN 4) of the Harness Motor (PL 20.16.13) to the Clamp
Motor - MP4.
4.
Mount the Top Cover, Front (RRP 6-16).
5.
Mount the Jogging Cover (RRP 6-14).
Volume 6 / Finisher - RRPs 6-779