Shift Section
Shifting Job
After the trailing edge of paper passes the Finisher Path Roller, the Exit Pinch Roll Guide
opens upwards. Then, the Shift Roller Unit is moved forwards or backwards to perform an
offset job, and, at the same time, the Shift Roller rotates to transfer the paper towards the
Exit Roller. Also, each time a sheet of paper is moved forwards or backwards, the Exit
Pinch Roll Guide closes and the Exit Roller rotates to deliver the paper. Then, at the
specified pulses after the Finisher Exit Path Sensor detects the trailing edge of the paper,
the Shift Roller Unit returns to the home position. Hence, the operation mentioned above
is repeated if the shift job is executed.
Fig 2-5 Shift Section
Volume 6 / Finisher - General Information
6-631