RRP 6-40 Pinch Roller Kit (PL 20.8)
Fig 6-32 Pinch Roller Pinch
Removal
1.
Remove the Top Center Cover Assembly (RRP 6-22, RRP 6-23).
2.
Remove the screw that secures to the Finisher from the Pinch Roll, and remove
the Pinch Roller.
3.
Loosen the bracket of the Pinch Roll, and remove the roller of the Pinch Roll.
4.
Repeat step 4 until you have removed all, or the necessary, roller of the Kit
Roller Pinch.
Replacement
1.
Loosen the bracket of the Pinch Roll, and mount the roller of the Pinch Roll.
2.
Align the Pinch Roller with the mounting position in the Finisher, and secure it
with a screw.
3.
Repeat the above steps until you have mounted all the Kit Roller Pinch.
4.
Mount the Top Center Cover Assembly (PL 20.5.9).
FRONT
Volume 6 / Finisher - RRPs
S4525-461
6-753