Rrp 6-41 Finisher Exit Path Sensor (Pl 20.8) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 6-41 Finisher Exit Path Sensor (PL 20.8)

Fig 6-33 Finisher Exit Path Sensor
Removal
1.
Open the Top Center Cover Assembly (PL 20.5.9) (RRP 6-23).
2.
Remove the second Kit Roller Pinch (PL 20.8.98) from the rear side. (RRP
6-40)
3.
Unplug the connector (P/J 2) of the Harness Sensor (PL 20.16.4) from the
Sensor : Path.
4.
Pressing the leading end of the Sensor : Path downward, disengage two hooks
on the upper side by pushing with a small screwdriver.
5.
Disengage two hooks on the lower side of the Sensor : Path by pushing with a
small screwdriver, and remove the Sensor : Path.
Replacement
1.
Align the Sensor : Path with the mounting position in the Finisher so that the
connector faces toward the rear, and hook it at four places.
2. Plug the connector (P/J 2) of the Harness Sensor (PL 20.16.4) to the Sensor :
Path.
3.
Mount the second Kit Roller Pinch (PL 20.8.98) from the rear side. (RRP 6-40)
4.
Close the Top Center Cover Assembly (PL 20.5.9).
6-754 DocuPrint N4525 Network Laser Printer - Service Guide
FRONT
S4525-462