General Information; Table 2-2 Finisher Specifications - Xerox DOCUPRINT N4525 Service Quick Reference Manual

General Information

Table 2-2 Finisher Specifications

Category
Configuration
Paper feed
Power
requirements
Specification
User installed option. The Finisher provides hole punch, stapling (up to 50
sheets), print job offset and stacking up to 3,000 sheets of paper. The
Finisher docks and latches with the Printer. All Finisher operations are
controlled by the Printer, specifically from the System Controller Board
through The Print Engine Controller Board.
Paper leaving the Exit section of the Printer is fed to the Docking Cover
Assembly, then directly into the Horizontal Transport. The H-Tra then
delivers the paper to the Finisher where hole punching, stapling, offsetting
(shifting) and stacking occur.
The Printer provides 110 VAC to the Finisher. The Finisher's power supply
provides all required DC voltages throughout the Finisher Option.
Volume 6 / Finisher - General Information 6-625