Duplex Assembly (Pl 8.8.2); Exit Sensor (Pl 9.3.62) - Xerox Phaser 3425 Service Manual

Duplex Assembly (PL 8.8.2)

1. Remove the Power Supply Board (page 8-42).
2.
Remove 4 screws securing the Power Supply Board to the Duplex Assembly and
remove the board.
Power Supply Board
1.

Exit Sensor (PL 9.3.62)

1.
Remove the Power Supply Board (page 8-42).
2. Remove 2 screws securing the Exit Sensor to the chassis and remove the Exit
Sensor.
Service Parts Disassembly
3
RH Guide (Duplex)
2.
1
2
-
LH Guide (Duplex)
3.
8-45