Rrp 10.11 Exit Sensor Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 10.11 Exit Sensor Assembly

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the Stacker
2. Remove the Lower Cover
3. Remove the Inner Exit Chute Assembly
page 6-106).
4. Release the locking tabs and remove the Exit Sensor Assembly.
5. Disconnect P/J227 from the sensor.
Exit Sensor Assembly
Phaser 4400 Laser Printer Service Manual
page 7-40.
(RRP 10.1 Stacker
(RRP 10.5 Lower Cover
on page 6-101).
on page 6-105).
(RRP 10.6 Inner Exit Chute Assembly on
6-111