3.4 Attaching Hydraulics and Electrical Connections
The procedure for attaching the header hydraulic and electrical connections depends on the windrower model.
Refer to the appropriate procedure:
•
3.4.1 M1170 Windrowers, page 29
•
3.4.2 M155E4 Windrowers, page 33
3.4.1 M1170 Windrowers
1. Open the windrower's left side platform. Refer to
windrower operator's manual for procedure.
2. Retrieve hydraulic hoses from header.
3. Attach hose support (A) to frame near windrower left
cab-forward leg, and route hoses under frame.
NOTE:
Route hoses as straight as possible and avoid rub/wear
points that could damage hydraulic hoses.
4. Disconnect male coupler (A) from pressure hose, and
female coupler and fitting (B) from return hose.
214075
ATTACHING HEADER TO WINDROWER
29
Figure 3.43: Hose Support Attachment
Figure 3.44: Hoses from Header
Revision A