GE
D
KTI106052, R
IRECTION
Section 8-17
Replacement of the Display Rear Cover
8-17-1
Manpower
One person, 70 minutes
8-17-2
Tools
Phillips screwdriver 1 and 2
8-17-3
Preparations
1.) Power Off/Shutdown the system as described in
2.) Disconnect all external USB-devices (e.g., USB printer).
3.) Remove the Battery as described in
4.) Remove the Handle as described in the
5.) Remove the Keyboard module as described in
6.) Remove the LCD Display Frame as described in
7.) Remove the LCD Display as described in
8-17-4
Display Rear Cover - Removal Procedure
1.) Carefully disconnect the Inverter cable and the microphone cable (not available with SW 8.1.2 and
higher) from the BBDI Rigid Flex.
2.) Remove the Backlight Inverter board from the Rear Cover Assembly.
8-38
10
EVISION
Figure 8-51 disconnect cables from Flex
Figure 8-52 remove Backlight Inverter board
Section 8-17 - Replacement of the Display Rear Cover
Section 3-6-3 on page
Section 8-11-4 on page
Section 8-10-4 on page
Section 8-15-4 on page
Section 8-12-4 on page
Section 8-16-4 on page
Inverter cable
Micro cable
V
OLUSON
S
ERVICE
3-72.
8-29.
8-28.
8-37.
8-30.
8-36.
i / V
e
OLUSON
M
ANUAL