Changing Ink Types; Removing And Storing Ink Cartridges - Oce CS 5050 User Manual

Changing ink types

When changing to a new ink type (i.e. from Océ Standard Colour ink to Océ
Outdoor Colour ink), you must change the reservoirs and the cartridges to
match the new ink type. If you are printing with only two different types of inks
using two sets of ink lines, you can use the colour-coded quick-connect fittings
to change ink types. However, if you use only one set of ink lines for different
ink types, you must purge and rinse the ink delivery lines with distilled water.
Attention:
precautions:
Do not
Never
Use only inks developed for the Océ CS 5050/5070 printers.
When changing ink types, you must do the following:
Remove and store ink cartridges
Remove and store ink reservoirs
Install new ink reservoirs
Install new ink cartridges

Removing and storing ink cartridges

To remove ink cartridges
Press
1 Utility/Access Cartridge
Disconnect the quick-connect fitting, noting the colour fitting to which it was
2
connected.
Printer maintenance and storage
For best results when changing inks, keep in mind the following
use Océ Standard Colour inks with Outdoor media or vice versa.
mix inks.
to move the cartridges out of the service station.
73