Resetsetting The Module To The Factory Settings; Configure Bluetooth; Table 43 Options For Resetting The Module To The Factory Settings - WAGO 765-1205/0100-0000 Manual

Commissioning

10.3.1.4.5 Resetsetting the Module to the Factory Settings

In many cases, it can be helpful to reset the module to the factory settings. This can be
done for various selectable classes of settings with the Settings menu item on the Fac-
tory reset tab.
Changes to settings require operator or admin rights. If you do not have these, the Set-
tings tab is grayed out and cannot be edited.
Various settings can be reset according to the radio button selection:
Option
Reset Device Informa-
tion
Reset Network Adapter
Settings
Reset Application Pa-
rameters
Reset All
To reset the module to the factory settings, proceed as follows:
1. In the left-hand column of the WAGO I/O Field Webserver, click the Settings menu
item.
ð The Device configuration tab appears.
2. Select the Factory reset tab.
3. Use the radio buttons to select the settings that you want to reset to their factory set-
ting values.
4. Click the [[Reset]] button.
ð The selected settings are reset to the factory settings.

10.3.1.4.6 Configure Bluetooth

The Bluetooth
66 Product manual | Version: 1.0.0
8DIO FLD EC DC 24V 2.0A
Table 43: Options for Resetting the Module to the Factory Settings
Reset Settings
Module settings (e.g., maintenance information, system time settings)
Network adapter settings (communication settings, IP address configuration, sta-
tion name)
Application-specific data (port configuration and parameters, remanent parame-
ters)
All Settings
®
tab provides the following functions:
765-1205/0100-0000
Figure 18: Settings Menu Item, Factory Reset Tab