Configure Bluetooth - WAGO 765-1503/100-000 Product Manual

765-1503/100-000
1. In the left-hand column of the WAGO I/O Field Webserver, click the Settings menu
item.
ð The Device configuration tab appears.
2. Select the Factory reset tab.
3. Use the radio buttons to select the settings that you want to reset to their factory set-
ting values.
4. Click the [[Reset]] button.
ð The selected settings are reset to the factory settings.

10.3.1.4.6 Configure Bluetooth

The Bluetooth
• Displaying information on the product's Bluetooth
• Displaying diagnostic information
• Activating the Bluetooth
• Starting a Bluetooth
• Resetting the Bluetooth
• Switching the Bluetooth
• Switching the Bluetooth
Proceed as follows to access these Bluetooth
server:
• Open the Bluetooth
ð The Bluetooth
Displaying Information on the Product's Bluetooth
The Information section of the Bluetooth
product's Bluetooth
Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
®
tab provides the following functions:
®
interface via DM code
®
firmware update
®
firmware
®
wireless connection on/off
®
LED on/off
®
tab.
®
tab appears.
Figure 20: Settings Menu Item, Bluetooth
®
interface module:
®
interface module
®
functions on the WAGO I/O Field Web-
®
Interface Module
®
tab shows the following information on the
Commissioning
®
Tab (Example View)
69