Table of Contents
Advertisement
765-1205/100-000
Changes to settings require operator or admin rights. If you do not have these, the Set-
tings tab is grayed out and cannot be edited.
Various settings can be reset according to the radio button selection:
Option
Reset Device Informa-
tion
Reset Network Adapter
Settings
Reset Application Pa-
rameters
Reset All
To reset the module to the factory settings, proceed as follows:
1. In the left-hand column of the WAGO I/O Field Webserver, click the Settings menu
item.
ð The Device configuration tab appears.
2. Select the Factory reset tab.
3. Use the radio buttons to select the settings that you want to reset to their factory set-
ting values.
4. Click the [[Reset]] button.
ð The selected settings are reset to the factory settings.
10.3.1.4.6 Configure Bluetooth
The Bluetooth
• Displaying information on the product's Bluetooth
• Displaying diagnostic information
• Activating the Bluetooth
• Starting a Bluetooth
• Resetting the Bluetooth
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
Figure 20: Settings Menu Item, Factory Reset Tab (Example View)
Table 41: Options for Resetting the Module to the Factory Settings
Reset Settings
Module settings (e.g., maintenance information, system time settings)
Network adapter settings (communication settings, IP address configuration, sta-
tion name)
Application-specific data (port configuration and parameters, remanent parame-
ters)
All Settings
®
tab provides the following functions:
®
interface via DM code
®
firmware update
®
firmware
Commissioning
®
interface module
69
Advertisement
Chapters
Table of Contents
