Configure Bluetooth - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000
To reset the module to the factory settings, proceed as follows:
1. In the left-hand column of the WAGO I/O Field Webserver, click the Settings menu
item.
ð The Device configuration tab appears.
2. Select the Factory reset tab.
3. Use the radio buttons to select the settings that you want to reset to their factory set-
ting values.
4. Click the [[Reset]] button.
ð The selected settings are reset to the factory settings.

10.3.1.4.7 Configure Bluetooth

The Bluetooth
• Displaying information on the product's Bluetooth
• Displaying diagnostic information
• Activating the Bluetooth
• Starting a Bluetooth
• Resetting the Bluetooth
• Switching the Bluetooth
• Switching the Bluetooth
Proceed as follows to access these Bluetooth
server:
• Open the Bluetooth tab.
ð The Bluetooth tab appears.
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
®
tab allows the following:
®
interface via DM code
®
firmware update
®
firmware
®
wireless connection on/off
®
LED on/off
®
interface module
®
functions in the WAGO I/O Field Web-
Figure 23: Settings Menu Item, Bluetooth Tab
Commissioning
103