Label Retract Distance, Set; Label Stock Type, Select; Label Width, Set - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Label Retract Distance, Set

Purpose: Sets the label retract distance to n 5 mil increments. This command works
with continuous label stock only. The label retracts to this distance at the
start of a print.
Default: n = 0
Syntax:
<SI>r n
The parameter range for n is from 0 to 399.
Notes: This command is effective upon execution.

Label Stock Type, Select

Purpose: Selects the type of label stock.
Default: n = 1
Syntax:
<SI>T n
n = 0
n = 1
n = 2

Label Width, Set

Syntax:
<SI>W n
Notes: The 3440 printer ignores this command.
6-44
*1233*
Continuous label stock (no breaks between labels)
Label stock with gaps between labels
Label stock with marks between labels (on back of label stock)
FranklinGothic
*1233*
FG 9pt Italic