Table of Contents
Advertisement
5.6
Label Cutter
Note:
This manually operated label cutter is a
standard feature, that can be replaced
with an optional automatic cutter.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
After printing labels or tags, cut the paper off using the manually
operated cutter as described below. Do not tear off the paper!
Caution:
Only touch the handle as illustrated below to avoid any risk of
cutting your fingers.
. Grab printed labels as shown in figure.
1
. Push cutter as shown in figure to cut off labels.
2
Note:
Do not pull at the label while it is being fed out; paper jam may
result.
. Return the cutter to its original position.
3
Important:
To avoid paper jams, make sure to return the cutter all the
way to its original position after cutting off the paper.
Chapter 5
Printing
59
Advertisement
Table of Contents
