Table of Contents
Advertisement
7.2
Error
Messages,
cont'd.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
Ink Error Messages, cont'd.
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Hardware Error Messages
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Chapter 7
EMPTY INK (K)
Black (K) ink not supplied to subtank.
Replace black ink cartridge.
CHECK CART (Y)
Yellow (Y) ink cartridge is not loaded.
Load yellow ink cartridge. If ink cartridge is
already loaded, sensor can no longer read
cartridge seal. The cartridge seal may be
stained. Clean the stain in such a case.
CHECK CART (M)
Magenta (M) ink cartridge is not loaded.
Load magenta ink cartridge. If ink cartridge
is already loaded, sensor can no longer read
cartridge seal. The cartridge seal may be
stained. Clean the stain in such a case.
CHECK CART (C)
Cyan (C) ink cartridge is not loaded.
Load cyan ink cartridge. If ink cartridge is
already loaded, sensor can no longer read
cartridge seal. The cartridge seal may be
stained. Clean the stain in such a case.
CHECK CART (K)
Black (K) ink cartridge is not loaded.
Load black ink cartridge. If ink cartridge is
already loaded, sensor can no longer read
cartridge seal. The cartridge seal may be
stained. Clean the stain in such a case.
POWER SW:OUT
Displayed when power switch for optional
cutter is off while cutter is being used during
printing. Also displayed when optional con-
nector is not plugged in.
Turn on the cutter power switch. Check to see
that connector is plugged in.
DOOR OPEN:MID
Displayed while front cover is open.
Close front cover.
DOOR OPEN:UPPER
Displayed while PHS unit is open.
Close PHS unit.
Troubleshooting
77
Advertisement
Table of Contents
