Table of Contents
Advertisement
4.14 Saving the
Settings
Intermec ColorCoder V4 – Installation & Operation Ed. 1
Use the following procedure to save the settings in the printer's
memory.
Caution:
Turning the printer off without first saving the settings will cause
them to be deleted.
. Continuing from chapter 4.13, the display panel shows.
1
OFF LINE
. Press the <Menu> key.
2
PAPER TYPE
. Press the <Cursor left> key once.
3
NVRAM
. Press the <Enter> key.
4
NVRAM SAVE
. Press the <Enter> key.
5
NVRAM
. Setting data is saved in the printer's memory. The printer can
6
now be switched off, if so desired, by pressing the power switch.
Chapter 4
Installation
38
Advertisement
Table of Contents
