Table of Contents
Advertisement
3.3
Mains
Connection
Intermec ColorCoder V4 – Installation & Operation Ed. 1
Operating specifications for the printer are as follows. Use only
with a power supply that meets these specifications.
Power supply voltage:
Power supply frequency:
Power consumption:
Do not share the AC outlet used for the printer with other devices.
Electrical noise from air conditioners, copiers, fluorescent lights,
etc., plugged into the same outlet as the printer may cause faulty
operation.
In order to insure that the power cord can be removed quickly from
the outlet, keep area around the outlet clear of objects which would
block access. Always grasp the plug, not the cord, when unplugging
the power cord from the outlet. Use of the printer with heavy objects
resting on the power cord or with the power cord severely bent will
damage the cord and is extremely hazardous, as it may result in
machine failure, fire, or electric shock.
Make sure that the printer has stopped printing before turning it off.
Unplugging the power cord from the outlet while the printer is
turned on may result in damage to the printer.
Always wait at least four (4) seconds after turning the printer off
before turning it back on again. Turning the printer back on too
quickly may result in faulty operation.
In the event of smoke emissions, a burning smell or other unusual
odour, abnormal noise coming from the printer, or any other sign of
abnormal operation during use, immediately turn printer power off,
unplug the power cord from the electrical outlet, and notify your
printer dealer.
Chapter 3
Installation Requirements
100-240 VAC
50/60 Hz
300 W max. (during printing)
11
Advertisement
Table of Contents
