Table of Contents
Advertisement
9.8
Setting
Margins,
cont'd.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
. Select which margin you want to set:
7
Top margin, just press the <Enter> key.
Bottom margin, press <Cursor right> key once, then <Enter>.
Left margin, press <Cursor right> key twice, then <Enter>.
Right margin, press <Cursor right> key three times, then
<Enter>.
TOP MARGIN
BOT. MARGIN
LEFT MARGIN
RIGHT MARGIN =00
. Press the <Cursor right> key. A cursor appears on the display
8
panel, e.g.:
TOP MARGIN
. Use the <Menu> key to increment, and the <Enter> key to
9
decrement the number above the cursor. Use the <Cursor
right> and <Cursor left> keys to move the cursor between
digits.
TOP MARGIN
. After setting all the digits, press the <Cursor right> key while
10
the cursor is below the last digit. The cursor disappears from the
display panel. Press the <Enter> key to set the selected margin.
You can now go on and set next margin:
BOT. MARGIN SET.
. After having set all margins, press the <Menu> key repeatedly
11
to return to the "OFF LINE" menu.
Chapter 9
Advanced Paper Settings
= 00
=00
=00
=00
=05
98
Advertisement
Table of Contents
