Table of Contents
Advertisement
6.2
Paper Roll
Replacement
CAUTION:
• Use only Collux labels and tags. Use
of other brands may result in smeared
and faint printing, negatively affect-
ing the print quality.
• Be sure to properly reattach the paper
roll supply unit cover. Using the printer
with the cover unattached will allow
dirt, dust etc. to negatively affect the
printer.
• Do not attempt to print any document
wider than the paper rolls.
• Documents excessively high in print
density may cause ink-spread images
and inversely affect ink fixing.
• Try to use up paper as quickly as
possible.
• To store paper rolls, keep them in the
original packing and store in a loca-
tion away from direct sunlight in order
to avoid discoloration of the paper.
• If you run out of paper during the
printing of a batch of labels, make
sure that the new roll matches the
previous one, or an error condition
may occur.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
When the printer runs out of paper, the message "NO PAPER" will
appear on the display panel.
. Lift the roll cover straight up and remove it.
1
. If the end of the paper is taped to the core, remove the tape.
2
. Simultaneously press the <Feed> and <Cursor right> keys to
3
discharge the paper from the print unit.
. Untighten the front roll retainer fixing screw and remove the roll
4
retainer.
Roll Retainer (front)
Chapter 6
Routine Maintenance
Fixing Screw
62
Advertisement
Table of Contents
