Table of Contents
Advertisement
8.2
Labels with Gaps
Measurement
Paper Roll, Outer Diameter:
Paper Roll, Core Diameter:
Paper Width (incl. backing paper):
Label Length:
Paper Thickness:
Backing Paper Margin, Outer Side:
Backing Paper Margin, Inner Side:
Label Gap:
Label Corner Radius:
The end of the paper web should be attached to the core with tape. Roll wound with printable side facing outward.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
Paper Width
Outer
Margin
Label Gap
Feeding Direction
Backing Paper
Allowed Values (mm)
Tolerance (mm)
76.2 – 180
76.2
50.8 – 101.6
38.1 – 406.4
0.18 – 0.26
2.3
2.0
2 – 9
3.0
Important!
Only use Collux labels!
Chapter 8
Inner
Margin
Corner
Radius
Remarks
N/A
N/A
N/A
N/A
N/A
–
Outer side = Side closest to control panel
0.5
Inner side = Side aligned with printer
0.3
0.3
Specifications
83
Advertisement
Table of Contents
