Paper Roll Loading - Intermec ColorCoder V4 Installation And Operation Manual

4.8 Paper Roll
Loading
1
/. Throughout this manual, the word
"Paper" is used as a generic term for
labels, tags, tickets, and strip of different
kinds and materials.
2
/. At delivery, the printer is preset for
labels with gaps 101.6 x 76.2 mm, see
chapter 11.2.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
1
Load a Collux paper
Caution:
Be sure to use Collux paper rolls. For test printing, use paper 101.6
76.2 mm (4 3 inches) or larger
. Press the <On Line> key. The display panel shows the message
1
"OFF LINE". Lift the roll cover straight up and remove it.
. Untighten the front roll retainer fixing screw and remove the roll
2
retainer.
Roll Retainer (front)
. Place a label roll on the take-up shaft so the core of the roll
3
positively seats on the inner roll retainer.
Chapter 4
roll according to the following procedure.
2
.
Fixing Screw
Installation
22