10.4 Output Option
Intermec ColorCoder V4 – Installation & Operation Ed. 1
Chapter 10
If the ColorCoder V4 is fitted with an automatic paper cutter, you
must enable the option interface on the printer's back. By default,
the output option is set to "not use".
. If "READY" is displayed on the display panel, press the <On
1
line> key.
OFF LINE
. Press the <Menu> key.
2
PAPER TYPE
. Press the <Cursor right> key four (4) times.
3
MAINTENANCE
. Press the <Enter> key.
4
TEST PRINT
. Press the <Cursor right> key three (3) times.
5
PARAM. SET.
. Press the <Enter> key.
6
DATE & TIME SET
. Press the <Cursor right> key twice.
7
OUTPUT OPT.
. Press the <Enter> key.
8
*NOT USE
. Press the <Cursor right> key once to select the "USE" option:
9
USE
. Press the <Enter> key to acknowledge.
10
OUTPUT OPT.
. Press the <Menu> key repeatedly to return to the "OFF LINE"
11
menu.
Advanced Printer Settings
103