Table of Contents
Advertisement
5.5
Printing from
Memory Cards
Intermec ColorCoder V4 – Installation & Operation Ed. 1
As an alternative to printing using the Windows printer driver,
ColorCoder V4 can also print labels stored in memory cards. In this
case, the printer does not need to be connected to a computer.
Memory cards should confirm to JEIDA Ver. 4.0/PCMCIA 1.0 or
JEIDA Ver. 4.1/PCMCIA 2.0 standards. The methods for storing
label layouts in memory cards is outside the scope of this manual.
Consult your local Intermec distributor.
To print a label stored in a memory card, proceed as follows:
Open the front cover of the printer, insert the appropriate
1.
memory card all the way into the slot to the left of the ink
cartridges, and close the cover.
To eject an inserted memory card, press the button below the
slot.
. If READY" is displayed on the display panel, press the <On
2
Line> key. The display panel shows:
OFF LINE
. Press the <Menu> key.
3
PAPER TYPE
. Press the <Cursor right> key twice.
4
PAPER SET.
. Press the <Enter> key.
5
PRINT PAGES SET.
. Press the <Enter> key.
6
PRINT PAGE=00001
Chapter 5
Printing
57
Advertisement
Table of Contents
