Table of Contents
Advertisement
5.3
Windows
Driver Print
Setup, cont'd.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
- Paper margin (minimum values)
Label/Gap & Label/Marker:
Up:
Bottom:
Left:
Right:
Tag/Marker & Tag/Hole:
Up:
Bottom:
Left:
Right:
- Scaling
Percentage:
- Scaling Switch
Toggles scaling On and Off.
- Printer paper size
Multiplies the set paper width and length by the percentage set
in the "Scaling" box.
. Review the various settings and make the desired changes. Then
7
click the "OK" button. If you have made changes in the settings,
a dialogue box appears:
. Click the "OK" button to acknowledge and return to the "BJ
8
Label/Card Printer" dialogue box.
. In the "BJ Label/Card Printer" dialogue box, click the "Op-
9
tion..." button. A new dialogue box is displayed:
In this box, you can change the following global settings, which
apply to all custom sizes. The "Option" dialogue box is available
from all applications:
• Paper type
Select matt coat paper (default) or glossy paper according to the
type of Collux paper used.
• Colour
Select colour printing (default) or monochrome printing.
Chapter 5
2.5 mm (0.10")
2.0 mm (0.08")
3.4 mm (0.13")
3.7 mm (0.15")
[(Set value of mark/hole length)/2] mm
[(Set value of mark/hole length)/2] mm
3.4 mm (0.13")
3.4 mm (0.13")
Range 50 to 200%. Default: 100%.
Printing
51
Advertisement
Table of Contents
