Intermec ColorCoder V4 Installation And Operation Manual page 81

Color label printer
Hide thumbs Also See for ColorCoder V4:
Table of Contents

Advertisement

7.2
Error
Messages,
cont'd.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
Memory Card Error Messages, cont'd.
Error Message:
Description:
Corrective Action:
Error Message:
Description:
Corrective Action:
Caution:
• Some memory cards may not allow battery detection; be careful.
• Never pull out or insert a memory card or turn the write-
protection on and off during writing to or reading from a
memory card. Such actions could cause loss of data or damage
to the card itself.
Fatal Error Message
Error Message:
Description:
Corrective Action:
Chapter 7
VERIFY ERROR:MC
Memory card internal battery is low.
Replace the battery of the memory card and
press any key. When replacing the battery,
read the memory card instruction manual
carefully. Data may be deleted.
PROGRAM ERROR:MC
Memory card write-protection is enabled.
Disable memory card write-protection, then
press any key and reattempt operation.
**CALL SERVICEPERSON
Displayed when fatal error occurs in the
printer.
If the message "Call Serviceperson" ap-
pears, turn off the printer power. Then restart
the printer and reattempt printer operation. If
printer operation does not correct itself after
restarting the printer, notify the printer dealer
from whom the printer was purchased.
Troubleshooting
80

Advertisement

Table of Contents
loading

Table of Contents