Load Media For The Label Dispenser - Intermec PC23 User Manual

Chapter 2 —

Load Media for the Label Dispenser

40
To use the label dispenser accessory for printing, you print labels on
label stock with a liner. As each label is printed, the label is
automatically peeled from the liner and is presented at the front of the
printer for manual removal.
1 Pull one or both of the printer latches toward the front of the
printer and lift the printer lid.
2 If there is an empty media core in the media compartment, remove
the core.
3 If you are going to load the same size media, continue with the next
step.
If you are using an external media holder for large rolls of media,
feed the media through the external media feed slot.
To adjust the media holders for a different media size:
a Pull the locking tab up.
PC23 and PC43 Desktop Printer User Manual