Table of Contents
Advertisement
6.6
Automatic
Cleaning
Intermec ColorCoder V4 – Installation & Operation Ed. 1
In order to maintain satisfactory image quality, the printer performs
automatic cleaning of the printheads. There are two modes for this
automatic cleaning, depending on the type of images that are being
printed. Please select the appropriate automatic cleaning frequency.
• Mode (A) is the standard mode (default).
• Mode (B) is recommended when printing under conditions of
low temperature or low humidity, or when printing images
having localized regions of high density. Selecting Mode (B)
causes the printer to perform automatic cleaning more fre-
quently, and to maintain the printhead in a higher quality state.
Caution:
Turning the printer off without first saving the settings will cause
settings to be deleted, see chapter 4.14.
. If "READY" is displayed on the display panel, press the <On
1
line> key. The display panel shows:.
OFF LINE
. Press the <Menu> key.
2
PAPER TYPE
. Press the <Cursor right> key four times until the display panel
3
shows:
MAINTENANCE
. Press the <Enter> key.
4
TEST PRINT
. Press the <Cursor right> key 6 times until the display panel
5
shows:
CLEANING MODE
. Press the <Enter> key.
6
*MODE (A)
. Press the <Enter> key to select Mode (A), or press the <Cursor
7
right> key to go on.
MODE (B)
Chapter 6
Routine Maintenance
69
Advertisement
Table of Contents
