Setting Partition Interval And Number Of Partition Sheets - Intermec ColorCoder V4 Installation And Operation Manual

9.7 Setting
Partition
Interval and
Number of
Partition
Sheets
Note!
These two setup options are only
available when the printer is not fitted
with an optional automatic cutter.
If such a cutter is fitted, they will be
substituted by the "Cut Interval" setup
described in the cutter's installation
manual.
Intermec ColorCoder V4 – Installation & Operation Ed. 1
The "partition interval" is the number of copies that will be printed
together as a continuous series and the "number of partition sheets"
is the number of blanks that will be fed out after the partition interval
in order to separate it from the next partition of printed copies.
Partiton interval
Caution:
Turning the printer off without first saving the settings will cause
settings to be deleted, see chapter 4.14.
. If "READY" is displayed on the display panel, press the <On
1
line> key.
OFF LINE
. Press the <Menu> key.
2
PAPER TYPE
. Press the <Cursor right> key twice.
3
PAPER SET.
. Press the <Enter> key.
4
PRINT PAGES SET.
. Press the <Cursor right> key.
5
INTERVAL SET.
. Press the <Enter> key.
6
INTERVAL
. Press the <Cursor right> key. A cursor appears in the value.
7
INTERVAL
. Use the <Menu> key to increment, and the <Enter> key to
8
decrement the number above the cursor. Use the <Cursor
right> and <Cursor left> keys to move the cursor between
digits.
INTERVAL
Chapter 9 Advanced Paper Settings
No. of partition sheets
=99999
=99999
=00050
Partiton interval
95