Tank Cover - Segway SNARLER AT6 S Owner's Manual

MAINTENANCE, STORAGE AND TRANSPORTATION

TANK COVER

1
Tank cover
3
Hexagon screw
1. First remove the seat. (see page 107)
2. Remove the two expansion screws in front of the tank cover
with tools.
3. Remove the two hexagon screws behind the tank cover;
4. Lift the tank shield upward.
There are two connecting wire harness at the bottom of the tank
shield. If the tank shield needs to be completely removed, please pull
2
Expansion screws
NOTICE
out the connecting wire plug.
108