Seat Cushion Remove - Segway SNARLER AT6 S Owner's Manual

MAINTENANCE, STORAGE AND TRANSPORTATION

SEAT CUSHION REMOVE

1
Cushions
1. Hook the seat hook with your fingers and move upward.
2. Lift the seat cushion upwards after it bounces off.
3. Remove the alarm wiring harness from the seat.
4. Take a seat cushion.
There is wire harness connection under seat cushion. Do not push too
hard when you remove the seat cushion and lift upwards in case the
2
seat hook
NOTICE
connector is broken.
107
3
Plug wire harness