Flasher; Disassembly - Segway SNARLER ATV 2021 Series Service Manual

A
B
ELECTRICAL SYSTEM

Flasher

Disassembly and assembly of the front shelf and front
guard (please refer to the relevant sections of the body)
【A】rubber sleeve
【B】Flasher

Disassembly

◆ Remove the installation rubber sleeve【A】from the
installation bracket
◆ Remove the wiring harness connector
◆ Replace the fl asher【B】
TEST
→
◆ If the turn signal does not flash or flashes
abnormally on the whole vehicle (the normal turn
signal fl ash frequency is 85/min)
◆ The lamp is out of light (one-side forward or
backward turn light is damaged), and the turn
signal fl ashes at a frequency of 120/min）
14 - 41