Add Gear Oil - Segway Villain SX10 Owner's Manual

Front/Rear Gearbox Oil Change
Torque

Add gear oil

1 2
Filling Plug O-ring
Torque
1. Position the vehicle on a horizontal plane.
2. Place the drain tray under the demand drive unit.
3. Remove the drain plug. Allow the fluid to drain completely.
4. Clean and reinstall the drain plug.
5. Torque to desired value.
6. Add the recommended amount of oil.
7. Reinstall the drain plug.
8. Torque to desired value.
9. Check for any leakage.
10. Dispose used oil properly
Drain Plug: 16-20N.m(11.8-14.8ft·lb) Drain Plug: 16-20N.m(11.8-14.8ft·lb)
3 4
Oil Dipstick
Filling Plug: 16-20N.m(11.8-14.8ft·lb) Filling Plug: 16-20N.m(11.8-14.8ft·lb)
4-13
1. Place a container
under the vehicle to collect
the waste oil.
2. Put the vehicle on
the horizontal surface and
remove the injection plug
and O ring.
3. Reinstall the
injection plug after oil
discharge is completed.
Torque to required value:
O-ring