Handlebars Adjustment - Segway Snarler AT6 S User Manual

MAINTENANCE

HANDLEBARS ADJUSTMENT

The handlebars can be adjusted to suit your needs.
WARNING
!
Improper adjustment of the handlebars or improper
torque of tightening bolts can result in limited steering or
loose handlebars; loss of control can result in severe injury
or death. Always follow correct adjustment procedure, or
visit Segway Powersports Authorised service.
Handlebar bolts tightening torque: 35 Nm
1. Loosen the four handlebar bolts.
2. Adjust the handlebars position according to your
preferences.
3. Tighten the two front bolts, then tighten the two
rear bolts. Leave a gap of 3 mm at the back of the
clamp block.
4. Tighten all screws and check that handlebars do not
restrict the steering.
74
M8×48 (4x)
1