ST STM32F207 Series Reference Manual page 1355

RM0033
Date
09-Dec-2010
Table 224. Document revision history (continued)
Version
USB OTG FS
Reworked
USB OTG HS
Updated Section 30.1: OTG_HS
Updated Figure 373: USB OTG interface block diagram
GPIO interface and DMA.
Updated Section 30.6.4: Host
Updated DNA and PKTDRPSTS bit descriptions in
OTG_HS device endpoint-x interrupt register (OTG_HS_DIEPINTx)
(x = 0..5, where x =
Removed DMAEN bit in
register (OTG_HS_GAHBCFG).
Removed GMC bit in
(OTG_HS_DCTL).
Removed OTG_HS_DIEPDMABx and OTG_HS_DOEPDMABx
registers.
2
Changed SOF to micro-SOF in
(continued)
OTG_HS_HFIR
FSMC
Updated Figure 412: Asynchronous wait during a read access
remove 2HCLK cycles between data sampling and falling edge of
A[25:0], rising edge of NEx, data transition.
Replaced MEMxHIZ+1 by MEMxHIZ in
controller timing for common memory
Updated MEMHIZx in FSMC_PMEM2..4 register description.
DEBUG
Modified Section 32.6.2: Boundary scan
Added DBG_RTC_STOP bit in
freeze register
Added STM32F2xxx JATAP ID code.
Added Section 33: Device electronic
RM0033 Rev 9
Changes
Section 29.6.4: Host scheduler.
introduction.
scheduler.
Endpoint_number).
Section : OTG_HS AHB configuration
Section : OTG_HS device control register
Figure 376: Updating
dynamically.
Section 32.16.4: Debug MCU APB1
(DBGMCU_APB1_FZ).
Revision history
to remove
Section :
Figure 417: NAND/PC Card
access.
TAP.
signature.
1355/1381
to
1375