Completing Initial Setup; Adding Redlink Accessories To The Thermostat - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™
Press Connect on
New Accessories.
Fig. 35. Thermostat in listening mode.
3. After a short delay (up to 15 seconds), check thermo-
stat to confirm the connection of each RedLINK

accessory. Touch
Outdoor Sensor
has been added
Fig. 36. Outdoor sensor added.
4. Touch Done at the thermostat after all new RedLINK
accessories are connected.
NOTE: Thermostat displays a countdown timer while in
the listening mode. If it detects no activity for 15
minutes, it exits listening mode.

Completing Initial Setup

5. Finish the setup by selecting the desired options.
Touch Done after you select the last option you want
to change.
THERMOSTAT TYPE
programmable
Fig. 37. Thermostat type.
68-0312—06

or to review the list.
MCR33972
M34150
The thermostat now displays its Home screen and the
thermostat setup is complete.
Fig. 38. Thermostat home screen.
Adding RedLINK Accessories to the
Thermostat
If you want to add RedLINK accessories after the
thermostat has been setup, follow these steps.
1. Touch Menu.
2. Select Installer Options.
Installer Options
3. Enter password (date code) and touch Done. See
"Finding Your Password (Date Code) to Access
Installer Options" beginning on page 20 for more
information.
Enter password
16
M33985
MCR33976
Fig. 39.
0 0 0 0
MCR33977
Fig. 40.