Wireless Indoor Sensor - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™

Wireless Indoor Sensor

The wireless indoor sensor senses temperature and
humidity in remote locations and communicates that
information wirelessly to the thermostat.
The indoor sensor can be used to do the following:
• Maintain a more consistent temperature throughout the
building by averaging temperatures. Temperatures from
all sensors, including the thermostat, are weighted
equally.
• Relocate sensing location (thermostat is in a poor
location).
• Relocate the thermostat (if you want to hide the
thermostat).
• Humidify and dehumidify in separate spaces (for
instance, humidify on the main level, and dehumidify in
the crawl space).
You can connect up to 6 Wireless Indoor Sensors to the
thermostat. If you connect a Wired Indoor Sensor network
to the S1, S2, S3 or S4 terminals, you can connect up to 5
Wireless Indoor Sensors to the thermostat.
The indoor air sensor has a 1 year battery life.
Battery level indicators (when batteries are inserted)
• Good: Status light flashes green for 5 seconds.
• Low: Status light flashes red for 5 seconds. Use fresh
batteries.
68-0312—06
Battery level indicators (during use)
• Good: Status light remains off.
• Low: Battery power will be depleted in about 2 months.
Thermostat displays Low Battery warning. Status light
remains off.
• Critical: Battery power will be depleted in about 2–3
weeks. Status light flashes red.
Temperature Display
The temperature reading displayed on the home screen is
from the sensor or sensors that are being used for
temperature control.
In Fig. 308, the temperature reading is the average of the
thermostat internal sensor and the remote indoor sensor.
114
Fig. 308.