Setting The Time/Date - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™
NOTE: The screen lights when you press any button. After you complete your changes, the screen stays lit for 16 seconds
if the thermostat is battery powered only or it stays lit for 45 seconds if the thermostat is system powered (C wire).
Depending on how your thermostat was installed, the screen light may always be on.

Setting the Time/Date

1. Touch the current time. The screen displays Select
Option.
Fig. 80.
2. Touch Time or Date, then touch Select.
Select Option
Time
Fig. 81.
68-0312—06
Fig. 79. Quick reference to commercial display.
MCR34092
Date
MCR34155
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set a program
schedule.
Current status. Shows system mode (heat/cool), outdoor
temperature and humidity (with optional outdoor sensor).
Override. Touch to override program schedule.
Current schedule. Touch an arrow to change temperature
setting and set a Temporary Hold.
Current program status.
Indoor conditions. Shows indoor temperature and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or system is set to
EmHeat. Flashes for battery-only power; on continuous if
system powered.
Micro SD Card port. Use card to load holiday schedules and
custom events.
 
3. Touch or until the proper time/date is displayed.
4. Touch Done to save or Cancel to ignore changes.
Please Set Time
5. Touch Home to redisplay the Home screen.
NOTE: The date is not shown on the home screen; how-
ever, it should be set to allow the thermostat to
adjust time automatically for daylight saving time
and for other features such as vacation hold.
60
6 :30 PM
MCR34094
Fig. 82.