Setting the Fan
1. Touch FAN to display fan settings.
Fig. 83.
2. Touch On, Auto, Circ, or Follow Schedule.
3. Touch Done to save and exit.
• On: Fan is always on.
• Auto: Fan runs only when heating or cooling
system is on.
• Circ: Fan runs randomly, about 35% of the time
(residential only).
• Follow Schedule: Fan controlled by program.
On
Auto
Fig. 84.
NOTE: In commercial use, touch Auto or On to temporar-
ily override the programmed fan schedule.
Setting System Mode
1. Touch SYSTEM to display system settings.
Fig. 85.
2. Touch desired option
• Heat: Controls only the heating system.
• Cool: Controls only the cooling system.
• Off: Heating/cooling systems are off.
• Auto: Selects heating or cooling depending on the
indoor temperature.
• Em Heat (heat pumps with aux. heat): Controls
auxiliary/emergency heat. Compressor is locked
out.
Heat
Fig. 86.
MCR34096
Circ
MCR34097
MCR34098
Cool
Auto
Off
MCR34099
3. Touch Done to save and exit.
NOTE: The Auto and Em Heat system settings may not
appear, depending on how your thermostat was
installed.
Preset Energy-Saving Schedules
These default Energy Saver settings can reduce expenses.
Table 4. Residential Use Default Schedule.
Heat
Start
(Mon-
Period
Time
Wake
6:00 am
70°
Leave
8:00 am
62°
Return
6:00 pm
70°
Sleep
10:00 pm 62°
Table 5. Commercial Use Default Schedule.
Period
Occupied 1
8:00 am
Unoccupied 1
10:00 pm 55°
Occupied 2*
12:00 am 70°
Unoccupied 2*
12:00 am 55°
* Period 2 is cancelled by default. If you activate it, the val-
ues shown above are default settings.
Adjusting Program Schedules
1. Touch MENU.
2. Select Edit Schedule to display Use Scheduling
Assistant?
Edit Schedule
View Schedule
• Touch Yes to create a schedule by answering
simple questions.
• Touch No to manually create a program schedule.
61
®
VISIONPRO
8000 WITH REDLINK™
Cool
Heat
(Mon-
(Sat-
Fri)
Fri)
Sun)
78°
70°
85°
62°
78°
70°
82°
62°
Start
Time
Heat
Cool
70°
75°
85°
75°
85°
MCR34100
Fig. 87.
MCR34101
Fig. 88.
Cool
(Sat-
Sun)
78°
85°
78°
82°
Fan
On
Auto
On
Auto
68-0312—06