Adjusting Dehumidification Settings: Residential Use - Honeywell Home VisionPRO 8000 Manual

5. If frost or condensation appears on the windows,
press MENU, scroll down and select Window Protec-
tion.
Fig. 119.
6. Window Protection is set on a scale from 1–10. A set-
ting of 1 represents poorly insulated windows and a
setting of 10 represents well insulated windows. A
lower number automatically reduces the humidity to
help prevent frost or condensation on your windows.
Use a higher number if indoor air seems too dry. To
prevent frost/condensation on your windows during
cold outdoor temperatures, poorly insulated windows
require a lower Window Protection setting, which will
limit how much your humidifier can run.
7. After you set the Window Protection setting, check for
frost/condensation on your windows in the morning.
If frost/condensation is present, adjust the Window
Protection setting to the next lowest number and
check for frost/condensation on your windows the
next morning. Continue to adjust the Window Protec-
tion setting to a lower number until frost/condensa-
tion is no longer present.
NOTE: Window Protection is available only if an outdoor
air sensor is installed.
NOTE: The thermostat controls humidification and dehu-
midification as needed to maintain the desired
humidity level. Depending on how your thermostat
was installed, the thermostat may maintain a 15%
separation between humidification and dehumidi-
fication settings.
Adjusting Dehumidification
Settings: Residential Use
This feature can control a dehumidifier or use your air
conditioner to reduce humidity.
1. Touch MENU and select Dehumidification.
Dehumidification
Equipment Status
2. Select Auto.
Dehumidification
Off
 
3. Touch or to select humidity level.
4. Touch Done to save your settings. Touch Cancel to
ignore changes.
NOTE: If your air conditioner is used to control humidity,
the temperature may drop up to 3° F below your
temperature setting until humidity reaches the
desired level.
67
®
VISIONPRO 8000 WITH REDLINK™
MCR34100
Fig. 120.
MCR34130
Fig. 121.
Auto
MCR34131
Fig. 122.
68-0312—06