Customizable Reminders - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™
3. Select the reminder you want to set.
 
4. Press or to set the timer length. Ranges, incre-
ments, and units will change based on the reminder.
NOTE: When set for run time days, the thermostat
tracks the amount of time the fan has run
and compares that time against the number
of run time days selected. Fan run time is
counted when there is a call for forced air
heating, cooling, or fan.
Fig. 247.
5. Press Done to save the reminder.
6. Press Reset Timer when you have completed the rec-
ommended maintenance or you can extend the timer
setting to turn off the alert and remind you later to do
the recommended maintenance.
7. Repeat these steps for all reminders you want to set.

CUSTOMIZABLE REMINDERS

The thermostat can be set to alert the user when it is time
for system maintenance or warranty renewal. You can set
up to 10 total Custom Reminders on the thermostat and
save them to a microSD card for easy download to multiple
thermostats.
Custom Reminders include:
• Service Reminder
— Set up for recurring or one time only.
• Spring Service Reminder
— Provide an alert based on date or outdoor tem-
perature.
• Fall Service Reminder
— Provide an alert based on date or outdoor tem-
perature.
• Warranty Reminder
— Set up for recurring or one time only.
• New Custom Reminder
— Enter new reminders or advertisements
— Set up for recurring or one time only.
68-0312—06
You can change or create custom reminders in ISU 1200.
For example, to set up a Fall Service Reminder based on
Outdoor Temperature:
1. Touch Press HERE to edit (see Fig. 248).
2. Select Fall Reminder and press Next.
3. Press up or down arrows until "Based on Out. Temp"
is displayed, then press Next.
98
Fig. 248.
Fig. 249.
Fig. 250.