Adjusting Dehumidification Settings: Commercial Use; Adjusting Ventilation Settings - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™
Adjusting Dehumidification
Settings: Commercial Use
This feature can control a dehumidifier or use your air
conditioner to reduce humidity.
1. Touch MENU and select Dehumidification.
Fig. 123.
Dehumidification
Equipment Status
Fig. 124.
2. Select Auto.
Dehumidification
Off
Fig. 125.
 
3. Touch or to select humidity level.
4. Touch Done to save your settings. Touch Cancel to
ignore changes.
68-0312—06
MCR34100
MCR34130
Auto
MCR34131
If your air conditioner is used to control humidity, the
thermostat may use the following methods to maintain
humidity:
• Cool from 1° to 5° F lower than your temperature
setting.
• Run cooling for the minimum "on" time to reduce
humidity.
• Run cooling and heating at the same time to reduce
humidity without lowering the temperature.

Adjusting Ventilation Settings

1. Touch MENU, and select Ventilation.
Ventilation
Equipment Status
2. Select Mode, Temporary Boost, or Lockout, then
select appropriate options.
Temporary Boost
3. Touch Done to save your settings. Touch Cancel to
ignore changes.
68
MCR34100
Fig. 126.
MCR34132
Fig. 127.
Mode
MCR34133
Fig. 128.
MCR34134